Gemco Equipment Ltd

0 PRODUCTS/SERVICES
- EMPLOYEES
- YEAR FOUNDED

Gemco “Projects” works mainly on large and complex workshop programmes requiring reliable, experienced, knowledgeable Garage Equipment people. We listen to your needs, advise where appropriate and develop the most efficient layout plans using the latest CAD programmes. We then quote you for all your Garage Equipment needs as well as civil and electrical works. However, unlike other suppliers of Garage Equipment Suppliers, it doesn’t end there. Our specialist Projects department can then liaise on your behalf with the Main Contractors, Architects and M & E companies. We will attend site meetings and answer all questions about technical information required with regards to power requirements, civil works specifications and layout drawings. We appoint one person to run the project from beginning to end so you have just one point of contact. That person takes care of all the designated workshop equipment requirements from delivery to installation as well as fully integrating with the main contractors needs. That leaves you to get on with other things. We particularly focus on -

  1. Health and Safety. You and your main contractor can rest assured that all the relevant Risk Assessments, Method Statements etc will all be fully complied with and in most cases are ready to produce immediately.
  2. Ensuring there is a full understanding of where the main contractor’s involvement starts and stops and where our involvement as the Garage Equipment suppliers starts and stops so no gaps are left only to be discovered towards the end of the project.
  3. The quality of the product and installation is second to none
  4. You’ll get unbeatable value for money - Gemco can assure you of that. 

GEMCO Service Division

We are the largest company in our sector with over 100+ field-based engineers covering the whole of the UK, so we are very likely to have a fully trained and experienced engineer near to you.

Collectively our engineers have 100s of years experience within the garage equipment sector, so there is not much we don't know about.

Our national call centre is dedicated to answer your call quickly, capture details of your requirement and when the call is completed, a suitably trained and experienced engineer will be booked to visit your premises. Normally this is next day at the latest but sometimes could be ‘same day'.

We are also the largest stockists of spare parts in the UK, even in Europe. With over £1.3m of spare parts available, which is primarily focussed on equipment where customers have a current Gemco Service preventative maintenance or calibration contract, we know we can offer the best response and service to keep your garage equipment operational with the minimum of downtime on any ‘unplanned' breakdowns.

We average 90% ‘off the shelf' availability on spare parts and all engineers receive delivery overnight - so if you want the best response and service to any breakdowns in the future, then take out a Gemco Service contract TODAY.

Unique to our company, all Gemco Service engineers are trained ‘internally' - all based on equipment manufacturer recommendations.

We know about the latest technology and legislations and so do all of our engineers.

Also all Gemco Service engineers are audited, at least twice a year, to ensure that the high standards that we know we can achieve - ARE BEING ACHIEVED.

GEMCO Tool Calibration

Quality
Quality is paramount in the services we provide to you and our market leading on-site calibration service is no exception. We can offer comprehensive portable lifting equipment inspection and small tool calibration service through our national network of mobile engineers. An essential part of this service is managing your equipment on our bespoke calibration database. Our system allows us to notify you of the planned visit in advance and ensures that your calibrations are completed on time - every time. Updated certificates are issued giving you total piece of mind.

Safety
Accurate and regular calibrations ensure that your critical measurement tools are maintained to the highest standards. Essential for safety critical items such as torque wrenches used for tightening wheel nuts, tyre pressure gauges and brake/engine service tools. Portable lifting equipment such as jacks and axle stands also require maintenance, our LOLER trained engineers are certified to inspect and test to the highest industry standards.

Traceablility

All certification that we provide you with is fully traceable to national standards and satisfies the requirements of ISO9001, PAS125 and vehicle manufacturers standards.

Replacement

Our engineers are able to offer replacement tools and equipment whilst on-site from their well equipped vans. Additionally, a wide range of portable lifting equipment and tools can be supplied via our
offices.

Items calibrated include torque wrenches, tyre pressure gauges, micrometers, pressure/vacuum gauges, dial test indicators, tracking gauges, wheel balancers, electrical meters, paint weigh scales, trolley jacks, transmission jacks, axle stands, bottle jacks, air jacks, slings and chains, portapower pumps and rams, wheel removal trolleys, commercial pit jacks, jacking beams, engine hoists 

GEMCO Belfast Division

GEMCO Equipment Ltd are suppliers of high quality Garage Equipment . Procuring from major manufacturer's around the world, we can offer a range of premium products, catering for all needs and applications:

  • Vehicle Lifting
  • Brake Testers
  • MOT Packages
  • Emission Testing
  • On-site Calibration of Workshop Tools
  • Workshop Design and Installation.

Partners of GEMCO within Ireland:

  • Stenhøj Autolift
  • BM Autoteknik
  • Dunlop
  • Rotary Lifts
  • Hofmann Megaplan Tyre
  • Samoa
  • John Bean Alignment (only N.Ireland)
  • Supertracker (only S.Ireland)

GEMCO Spares Division

Not sure where to buy your garage equipment spare parts from? TRY US!

We have the largest stocks of garage equipment spare parts anywhere in the UK. With £1.3 million worth of stock and over 15,000 different lines, we are likely to have what you want.

We are authorised stockists of spare parts for maket leading brands such as Autop, BM Autotechnik, Bradbury, Crypton, Dunlop, Majorlift, Mondolfo Ferro, Omitec and Stenhoj

We also stock 1,000s of garage equipment spare parts for other brands such as Tecalemit, Hofmann, Laycock, HPC, Samoa, Rotary, Ravaglioli, Maha, Kismet, Stertil Koni, Nussbaum, Dieseltune, Arex, Churchill, Ingersoll, OMCN, Bear, Hans Hougard, Zippo, Balco, Werther, Beissbarth, Pang, Slift, Oma and much, much more.

Nearly 90% of our customer requirements are stocked and are available for guaranteed next day delivery.

For further information, please call 0844 249 8102 begin_of_the_skype_highlighting 0844 249 8102 end_of_the_skype_highlighting

Coming soon... our comprehensive range of garage equipment spare parts will be available to purchase online.

ATF Lane

GEMCO Equipment Ltd are the number one providers of ATF Lanes :-  for the Commercial Vehicle and Bus market in the UK.

GEMCO offer the total package form start to finish for your ATF Lane project starting with site survey and drawings for your VOSA approval, Civil and electrical works, project management, aftercare services.
  GEMCO provide all items required for the ATF Lane including: Prefabricated Steel Pits,VOSA style BM12200 Commercial Brake Tester, BM53000 Play Detectors, Headlight Testers, Pit Jacks, Smoke Meters
  All accessory items including tools and signage are also provided. We also provide the best solution to Load Simulation with Chassis Load Simulation or BM74000 Load Simulator for your ATF Lane.
GEMCO's team of installers are able to provide the total programme with civil and electrical works as well as equipment installation for your ATF Lane.
  If required GEMCO can also provide a Dual Lane for both Brake Testing and Tachograph Testing
Can we help?