Babcock Wanson (UK) Ltd

Energy saving and efficiency are key factors for modern industry. One of the most significant energy users in a typical production facility is the steam boiler and, therefore, investing in energy saving equipment should always provide a very good return on investment.
Using its extensive expertise in energy efficiency and boiler design and optimisation, Babcock Wanson offers a broad range of exhaust gas economisers perfectly matched to the boiler to which they will be fitted. These economisers recover heat from the exhaust gas to, typically, the boiler feed water thereby optimising the overall efficiency of the plant in the most compact and cost-effective manner.
These advanced and robust economisers can significantly increase the boilers efficiency often so much so that the return on investment can be as little as one year. More than 400 Babcock Wanson economisers have been installed on existing boilers.

Babcock Wanson has been designing and manufacturing Air Heaters for industrial applications for many decades. With long experience in the design and manufacture of both Direct and Indirect Process Air Heaters for a wide range of industrial drying applications we are well placed to advise on which method and model is best suited to your specific process.

From 600,000 to 6,000,000 kCal/h (697 to 6,976 kW)
The EUROSTEAM (ESM) from Babcock Wanson is an horizontal, high efficiency, rapid steam generator. Based on our proven coil design to provide a robust, energy saving and environmentally friendly boiler, the ESM unit can produce steam from a cold start in as little as three minutes.

With an ever-increasing focus on saving energy, beneficial from both a financial and environmental perspective, Babcock Wanson offers a wide range of Heat Recovery Equipment, from retrofit Exhaust Gas Economisers to standalone Waste Heat Recovery Steam or Heated Fluid Boilers plus bespoke solutions to meet customers’ needs.

We are a European lead manufacturer of all types of fired steam boilers, offering a wide range of fire tube boilers as well as rapid steam generators (coil type boilers). Based on your steam production needs, we provide you with tailor-made solutions that provide greater savings, increased safety and better reliability.

Please call for more information.

Babcock Wanson has unique expertise in boiler house water treatment solutions that has been demonstrated throughout thousands of installations around the World.

From 90 to 2,300 kW
The HEB Hot Water Boiler from Babcock Wanson is a high efficiency unit designed primarily for lower temperature process heating applications. With 18 models providing heat outputs of between 90 and 2,300 kW and maximum operating pressures between 5 and 6 barg, the HEB has been designed to operate in a wide variety of industrial applications.
HEB provides a maximum water outlet temperature of 100°C and is often fitted with a fully modulating burner to provide very close control of process water temperature.
The HEB configuration of the combustion chamber and heat exchange surfaces has been fully optimised to suit the flame geometry of the matched burner. A variety of Gas, Fuel Oil, Dual Fuel and/or Biogas can be used with the HEB burner.

We remain at the forefront of boiler technology and is pleased to present its range of Hot Water Boiler with guaranteed performance for heating applications. Each boiler has been meticulously crafted to ensure maximum performance under all conditions.

Please phone for more details.

From 90 kW to 7 MW
Constructed from carbon or stainless steel to the highest specification, HTV-N Indirect Process Air Heaters provide clean hot air at up to 350°C. The heaters can be fitted with inspection and cleaning doors, condensate drains and water-resistant gaskets where the process demands and utilise specialist welding procedures to reduce the risk of particulate deposits on the heating surface.
HTV-N is supplied complete with a fully matched burner for gas or oil firing and an optional economiser for very high efficiency operation. The modulating burner provides exact control of the process air discharge temperature.
All HTV-N Indirect Process Air Heaters are custom designed to suit the specific demands of each installation. Process air flow ranges between 1,000 to 100,000 kg/h with air discharge temperature up to 350°C.
HTV-N heaters simplify and reduce the total cost of installation and operation when compared to traditional indirect heating methods. Particularly when planning new installations, the reduced space demand and ease of operation greatly reduce overall costs and normal operating maintenance demand.

From 1.1 to 10.5 MW
HW3P Hot Water Boiler is a full 3-pass fired heater designed for operation with Natural Gas, LPG, Light Fuel Oil and a variety of specialist Bio-fuels. The robust and proven configuration of the HW3-P guarantees reliable boiler performance in all industrial heating applications.
HW3P is constructed with specially constructed burners for low NOx operation in full compliance with the Medium Combustion Plant Directive whilst still providing high operating efficiency and thereby very low overall emissions.
The HW3P boiler from Babcock Wanson provides a maximum water outlet temperature of 106 °C and is fitted with a multi stage or fully modulating burner to suit the process load and provide very close control of process water temperature.